LightSpeed Mount makes your residential solar install faster, simpler,
saves you money, and looks great.
Simply spin the Arm to reach your desired height off the roof without having to loosen or tighten any bolts. Each rotation is a 1/8” change in height, and the design provides 1.5” of adjustability above the roof to compensate for the most extreme roof undulations.
The Arm rotates around the Base to provide 6 inches of North-South and East-West flexibility after the Base is secured to the roof. No need to loosen and re-tighten any nuts or bolts.
Pegasus Solar’s LightSpeed Mount Corner Hinges are pre-installed on PV modules at the factory. Two 5/16” SS bolts are used to connect adjacent modules together on the roof.
Once connected together, the PV modules are secured in a single rigid plane so there’s no worry about module sliding, shifting, or misalignment. Modules can be assembled in portrait, landscape, and mixed orientations.
LightSpeed Mount has been proven time and again to reduce installation times by 50% compared to traditional rails. With 25% fewer roof penetrations and 60% fewer parts to assemble, the LightSpeed Mount system is easy to learn and fast to install.
The timelapse video showcases the quick installation time, including layout, leveling, module installation, connecting module leads, and clean-up of all packaging.
Corner Hinges attach modules only within a given row, so the each row can be independently positioned left or right without additional hardware. Adjusting rows for roof vents or other obstructions just got a whole lot easier.
Modules can be installed in portrait, landscape, or mixed orientations within a single array. And since each row is independent, arrays can easily be designed in terraced or offset shapes.
Skirts deliver superior aesthetics and are completely optional. They come in Portrait or Landscape size and do not require any additional hardware to attach, making installation process quick and easy.
Skirts are not required for module alignment or for UL 1703 Fire Rating Class A standards*. They may be installed at any time during the installation and attach to the bottom row of Single and Double Mounts.
*See Installation Manual for details
35mm and 40mm
+/- 3″, 6″ Total
1 1/2″, 1/8″ per Rotation
Standard 1/2″ Socket
One Ground Lug Required per Array
UL STD 2703, ASCE 7-05 & 7-10
Material & Finish
Partially Anodized Black Aluminum with SS Hardware
One-Piece Formed Metal, 0.7″ tall cone
No washers required – 100% mechanical
Tested to AC287 Without Sealant